Anti-Graviynoy Protection Film
Reviews Motorists
Probably each of us has seen numerous scratches and chips on the car body. And even a slight defect capable of significantly spoil the appearance of a particular machine. What is most interesting, chips and microcracks occur already during the first weeks of operation of cars. So if you want to keep an attractive appearance of your iron friend as long as possible, you should be interested antigraviynaya protection of the car body. Responses about it and review this protection - later in this article.
What is
it?
Antigraviynaya protection is a small film layer that covers
a certain portion of the vehicle body. Sometimes it is glued around the
perimeter of the paint (so-called comprehensive treatment).
What makes this film a car? Thanks Anti-Graviynoy protect your
vehicle will be less exposed to external factors. This corrosion and
ultraviolet rays, dust and even road, which forms visible defects on the
lacquer coating.
Varieties
It is worth noting that the protection antigraviynaya car
can be of several types. Total taken to distinguish between three types of
films:
01. Polyurethane.
02. Vynylovuyu drink.
03. Antigraviynuyu liquid.
To
find out the characteristics of each, consider their properties separately.
Thus the polyurethane film, where is it used? Such
protection antigraviynaya car is mainly used on the front end. This hood,
bumper and mirror are sometimes antigraviynaya protection film producers is
still on the line. However, not all companies have resorted to such a
procedure, but because the drivers are left to think about how to protect your
car. Of course, one should not be limited polishes.
Compared with other types of protections, this film has a
large thickness, and therefore set the more vulnerable areas of the body.
Reviews drivers say that it is able to protect the car not only against insects
and dust of the road, but also from being hit by stones flying from under the
wheels of oncoming cars. Also, this type of film perfectly protects the
paintwork of the car from the branches. This is a very big plus for those who
like to frequent field trips. In quality polyurethane protection is very
flexible. Therefore, it is easy to bear on the most izgibistye areas of the
body.
Also note the high motorist’s protection film from UV
exposure. Despite its transparency, it protects the paintwork of the body from
sunlight and preserves the pristine color of the car over the years.
Now vinyl antigraviynaya protection of the car body.
Reviews drivers say it copes with its responsibilities in the area of the wings
and wheel arches. Vinyl film thickness is less than the polyurethane. However,
this does not mean that it is more vulnerable to external factors. As
polyurethane, vinyl film perfectly protects the paintwork of the body from
ultraviolet radiation, gravel, stones and road dust. But put it on too raised
portions is not recommended.
Liquid protection is a relatively new, and therefore is not
used as often as proven vinyl and polyurethane film. Although the varnish
antigraviyny was voted the best innovation in the United States in the field of
materials to protect the cars body. It is also clear, but it is different from
the technology of the previous two cases.
What
good antigraviynaya protection film?
Compared with the polish, the film has a lot of advantages,
some of which we now list. Firstly, it is a constant protection of the body. If
polishes are only temporary (2-3 months), the auto antigraviynaya protection
prevents UV rays and rubble throughout the year. In addition, to determine
exactly whether there was a layer of polish on the body or not, it is very
difficult. It so happens that 80% LCP it is, while the remaining 20% is not
available. In this case, less than half of the body is defenseless, and sooner
or later it appeared the first chips and micro cracks. But once the coating is
no longer susceptible to negative influences, the need for re-painting a car is
completely eliminated.
Secondly, the protection film body Anti-Graviynoy saves
your car from the negative consequences for minor accidents. Now, at the
slightest touch of the bumper curb or another car parking you have no need for
additional straightening antigraviynaya protection film.
Thirdly, if the protection body Anti-Graviynoy have no need
for polishing the vehicle constant. Now, in order to refresh its appearance,
you just wash away the dirt from the surface of the machine. A protection
already provides antigraviynaya film. It scratches and chips appear much less
frequently than on top of the paint.
Thus,
antigraviynaya protection headlights, bumper and hood allows to protect the
body parts on the following factors:
01. Ultraviolet rays.
02. Alkaline and acid chemistry.
03. Gasoline, solvents and alcohols.
04. Sticking insects.
05. The effects of minor accidents.
06. Chips, scratches and other deformations paintwork.
Properties
of polyurethane and vinyl film
What else is different antigraviynaya protection of the car
body? Reviews drivers noted the high service life of the film. As practice
shows, antigraviynaya protection on the body is able to hold up to 5-6 years,
and even while performing all of its functions at 100%. Also, this film is not
afraid to frequent washing under high pressure. In the sun, it is not cloudy
and does not turn yellow, and remains as transparent and invisible, as before.
Also, it does not require for an extra care and it will save you time and
money. In addition, the risk of Anti-Graviynoy film rust completely excluded.
And it was the corrosion is the most terrible enemy body passenger cars and
SUVs.
How is
the installation of the film? The preparatory process
Work to install the "antigraviyki" produced on
specialized service stations and dealerships. In fact, many car dealerships
offer additional services for installation of a protective film on a new car.
It's very important, because even in the first 100 kilometers covered body of
the car starts to micro-scratches and cracks. The very same process of applying
is simple, but very laborious, and therefore requires special skills and experience.
As a car prepared for pasting "antigraviykoy"?
First, the machine is completely washed out. And these
operations are exposed even new cars. Thereafter, the body is tested for the
presence of any minor impurities. This may be traces of insects, resin, bitumen
stains and so on. After the paintwork is treated with abrasive clay and the
latter, due to their properties, perfectly removes dirt, even those that cannot
be seen with the naked eye. Typically, the clay is mixed with a special soap
solution or detergent antigraviynaya protection auto.
If the car body found scratches and cracks that their master’s
using paste. By the way, at the end of this work it also balances carefully
washed.
It would seem that the body is fully washed, Align from chipping.
It's time to get to work. But no. Pre-film surface before the label carefully
degreased body. Special means completely remove residues car shampoo that has
been used previously in the sink. The final preparation is carried out with
glass cleaner that cleans well and degreased surface.
Directly
Pasting
How is antigraviynaya protection? After all the cars above
assembling procedures treated with a solution which further avoids the
formation of blisters on the film.
In the next step wizard remove the film from the substrate,
and choosing a place where to install it. This may be the wings, bumper,
mirrors, side skirts and even the roof. Then, it is placed on the surface. Top
film also processed mounting solution. Next comes the hard work - forcing bubbles
and the solution from the surface of the body. This is to ensure that the
adhesive securely grappled with vinyl (and, of course, the body with bubbles is
not as attractive as without them). Unnecessary components expel using the
squeegee at a 45 degree angle. The bubbles are removed by using an insulin
syringe with a solution of isopropyl alcohol. The puncture of the film at the
same time carefully smoothed cloth. When working with a syringe, it is
important not to damage the paintwork of the car. Well, if there are pasted
over surface relief bends (for example, if it mirrors), to simplify the film
works a bit stretched. It is worth noting the following: the relief forms a
certain area of the
body (which is applied to "anti-gravity"), the more difficult to
produce work. Therefore, it is often motorists seek installing films is
specialized centers.
Upon completion of installation work, film professionals
rubbed dry with a clean cloth. After that the surface protection is applied Anti-Graviynoy
special polish that will give vinyl water-repellent properties. If the film is
formed on the surface scratches (for example, casual fit), they can be removed
using a punch-dryer. The damaged area directed hot air stream, and then the
surface of the vinyl again become as smooth and shiny body protection Anti-Graviynoy
film.
Top film may be coated with a special layer of varnish
which prevents yellowing on the surface of a body and another plaque. If the
technology installation was observed exactly the life of this protection will
be about 5-6 years.
How to
fit vinyl?
Anti-Graviynaya protection hood can be pre-cut to a pattern
specific make and model of car or applied as a sheet. In the latter case, the
film is adjusted by trimming excess edges of special patterns. But most shops
are mounted ready protection, the corresponding size of a particular area of the body.
Service
regulations
After installing Anti-Graviynoy film experts recommend not
wash the car for 4-5 days. This is necessary to ensure that the adhesive layer is
better grappled with the surface of the paint. At the end of these days, this
type of protection is not in need of additional care.
In
what must be done indoors work?
It is worth noting that the quality of the work performed
depends not only on the professionalism of service, but also on where was
carried out this taping. Thus, the room in which the installation can be
carried Anti-Graviynoy protection?
Firstly, it should be light and warm. The air temperature
in the room should not be less than 18 degrees Celsius. In this case, the
presence of drafts excluded. Secondly, this place should be clean. Too much
dust can interfere with the installation Anti-Graviynoy protection. With the
constant movement of her masters particles can get under the film, where it
will be very difficult to remove. Clothing itself installers must be free
cloth. Third, you need to pay attention to the hand of the master. They must be
sterile clean both before and during installation. If the fingers will be the
dirt, she would fall on the adhesive layer of the film. Remove pieces of it, as
the dust is almost impossible.
Where
better to set the "anti-gravity"?
Most vulnerable to stones, gravel and road dust are the
front part of the car. This mirrors, wings body, bumper and hood. Also, do not
forget the trunk and thresholds. At these sites also often gets scratched and
chipped. Well, it is best to make a comprehensive protection of the body. So
you save the maximum paintwork of the car in its original form anti-graviynaya
protection thresholds car.
It is worth noting that anti-graviynaya skid plate is made
by processing special bituminous solution (m. N. Corrosion protection). It,
unlike gluing film body can generate its own. The main thing is that the
particles of bitumen were not included on the painted parts of the body. By the
way, underbody protection anti-graviynaya perfectly prevents corrosion on metal
surfaces. But the bulk of the rust appears there, as the bottom of the hardest
hit by the stones, dirt and other road debris.
Cost
How much is anti-graviynaya protection of the car body?
Reviews owners note that the total (integrated) pasting costs about 40-50
thousand rubles. This amount is already included the film itself and the cost
of the installer. When integrated vinyl pasting processes the following body
parts:
01. Bumper.
02. Lights.
03. Door.
04. Hood.
05. Rear-view mirrors.
06. The inner and outer door.
07. Front and rear bumper.
08. Roof.
09. Front and rear fenders (on both sides).
You can make partial and pasting. It will cost you less.
For example, anti-graviynaya protection thresholds car costs about 1600-2000
rubles, and mirrors - around 1000. The cost of booking the two headlights is
about 1,500 rubles. The most expensive will be taping the roof - about 5000
rubles anti-graviynaya protection lighthouse.
So, we figured out how to protect car Anti-Graviynoy
produced film, it really gives the result and how much is this service to the
service station.
